Non-Wago Connector block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is not really a remix as I made it from scratch but was inspired by the "Wago 221 Power-Rail" by hedwig. This is…
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 287
- Wydruki
- 5
- Wyświetlenia
- 2166
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is not really a remix as I made it from scratch but was inspired by the "Wago 221 Power-Rail" byhedwig. This is to fit the cheap Chinese Wago "knock off" versions available from Aliexpress. it is just a 3 way one only as that is what I needed.
I have also added a cable tie from below. (It needs to be quite a fine cable tie but it fits the ones I had.
Print Settings
Printer:
Ratrig V-core 3 300
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament:
Generic PLA+
Black
Notes:
I don't really think it matters what material this is printed in as it is for indoor use only and does not come under any stress.
Category: Electronics