1 / 2
RAMBoBox LCD Reloaded
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made some small changes to incorporate a smart lcd controller into the lid of the box. This resulted in a slightly…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Made some small changes to incorporate a smart lcd controller into the lid of the box. This resulted in a slightly longer box. Incorporated fan mounts for (2) 40MM fans. I have not yet printed this box entirely, but have printed some test lids and the original box for purposes of test fitting and improving the design.
This print is very challenging in ABS as the layers tend to want to delaminate even when printing in an enclosure.
Updates:
- 05/02/2015: Got both sides printed and realized during assembly that the fans will have to be reduced for clearance with the LCD and I completely forgot to add holes for electronics from the RAMBo board. Box isn't tall enough either to clear the wiring and connectors of the LCD panel. Back to the drawing board.
Category: 3D Printer Accessories