Hunter Douglas Duette blind mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple replacement part for when you're in a pinch
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Print on its side like the model shows, use support for the slot. I'd recommend at least 3 walls. You can also use the original clip instead of printing the one included here.
When installing don't over tighten the screw or it will likely strip out, just use enough force to hold the clip (?) in place. Use the hardware from the original clip (I'm assuming this is replacing a broken old one)
If your blinds are mounted from the back let me know and I'll model the holes there too, but I think most are from the top so I kept them out for more (probably uneeded) strength.
Of course the better the plastic the more it should hold up. Mine's printed out of PLA, I will update if I have any issues with it.