Magnet inserter with polarity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple tool for inserting a magnet into a pocket with known polarity.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This tool uses an embedded 6×2 magnet to spin another magnet to known polarity, then grip it and insert it into a pocket. The inserted magnet does not need to be the same size. There are both north-up and south-up versions. The label is the pole that is facing you.
The model itself was done by scratch from me. It was inspired by @Clough42’s tool in his recent video but is longer to be more ergonomic. If you prefer a smaller version, try @trses’.
You will need to add a pause to insert the tool’s own magnet before the layer that covers it. The top of the magnet is at 2.5mm. In PrusaSlicer, that means put a pause on the first layer shown covering the magnet. I assume 0.25mm layers but that is probably not critical.
Optionally, add a color change before the polarity letter starts.
For remixes, you may like to start with the OnShape source document.
Out-of-focus cats neither included nor required.