1 / 3
Carvera Air Shop-Vac Adapter for 1.25" or 31 mm Hose — zdjęcie 1
1 / 3

Carvera Air Shop-Vac Adapter for 1.25" or 31 mm Hose

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter to use the Carvera Air with a shop-vac with 1.25" hose instead of the dust collector for chip evacuation.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

An adapter to use the Carvera Air with a shop-vac with 1.25" (1-1/4") or 31 mm hose instead of the dust collector for chip evacuation. Plugs directly into the dust collector port and simply lets you run the shop-vac instead.

Print in PETG and use enough walls to print completely solid. Other settings don't matter much.

This model was created using Fusion 360.

Tagi