Reaver Mouse (Mini 3D Spacemouse w/ Hall Effect Sensors)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PCB version of @InnerBushman's CAD mouse / Spacemouse using Hall Effect Sensors and his TPU spring/magnet plate combo.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UNTESTED: PARTIALLY TESTED (25-09-2026):
Based on testing done by @Predator27_5038721:
PCB radius has been reduced by a mm
J1, J2, J7, and J8 have been flipped
base has been cut out for button clearance
knob and chimney have been shortened by 4mm, so no more weird parts or 26 AWG required.
base cut out for sensor socket clearance
Decided to design a PCB version to avoid all the wires. I will hopefully test it fairly soon. I couldn't think of a good way to connect the sensors to the sockets, so it will most likely require soldering 26 AWG solid core wire to the leads. That or finding the elusive SS49E-L, or the slightly less elusive 8.5mm tall 1.27mm sockets. Please check out InnerBushman's link for better documentation.