1 / 4
Holder for PCT-222 connector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base for Mounting PCT-222 Connectors
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
You will need a #6 screw or one with a 4mm diameter; preferably, the screw should be a Phillips-head type so that the head does not interfere with the connector. The model has a tolerance of 0.05mm.
Simply insert the snap into the base and thread the screw through both pieces.
No special brackets or configurations are required.