1 / 4
Holder for PCT-222 connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base for Mounting PCT-222 Connectors
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
You will need a #6 screw or one with a 4mm diameter; preferably, the screw should be a Phillips-head type so that the head does not interfere with the connector. The model has a tolerance of 0.05mm.
Simply insert the snap into the base and thread the screw through both pieces.
No special brackets or configurations are required.