Tamron SP 300mm f/2.8 Lens cap (60B)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Twist on lens cap for a Tamron SP 300mm f/2.8 LD (IF) lens
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
The model has been designed to not need supports and there is also a foam insert template file for foam inserts to be cut based off of. While the central circle does not contact the glass, I put foam there anyways.
The foam i used is 2mm EVA foam but that gives a bit of a tight fit. The compression of the foam could make it a nice fit over time but if you want a perfect fit right away, I would recommend using 1.5mm foam (not tested). Just cut the foam to shape based on the template and super glue it in place.
I printed in PLA cause that's the only non abrasive or translucent filament I have right now and I don't plan on leaving it outside anyways. Would recommend printing it in a material like ABS/ASA/PETG.
I didn't think about the direction of twist to lock so this twists left to lock but you can easily fix that by mirroring it in slicer
If you're looking for a lens hood, be sure to visit my profile as i have also released a hood for this lens