Tamron SP 300mm f/2.8 Lens cap (60B)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Twist on lens cap for a Tamron SP 300mm f/2.8 LD (IF) lens
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
The model has been designed to not need supports and there is also a foam insert template file for foam inserts to be cut based off of. While the central circle does not contact the glass, I put foam there anyways.
The foam i used is 2mm EVA foam but that gives a bit of a tight fit. The compression of the foam could make it a nice fit over time but if you want a perfect fit right away, I would recommend using 1.5mm foam (not tested). Just cut the foam to shape based on the template and super glue it in place.
I printed in PLA cause that's the only non abrasive or translucent filament I have right now and I don't plan on leaving it outside anyways. Would recommend printing it in a material like ABS/ASA/PETG.
I didn't think about the direction of twist to lock so this twists left to lock but you can easily fix that by mirroring it in slicer
If you're looking for a lens hood, be sure to visit my profile as i have also released a hood for this lens