Foot Plate (Hexagon Style) for TiLite Wheelchair.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An optional, more interesting (temporary) replacement for a TiLite wheelchair's foot plate.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Public Domain
We deserve better options for wheelchair accessories. Existing offerings are sparse, expensive, and ugly.
Before printing make sure this plate fits your wheelchair mounting point(s). The screws used (above) must be 3.25" apart, screw center to screw center.
This foot plate can be printed for as cheaply as $1 (probably even cheaper) and serves as a short-term temporary replacement to the $145 OEM replacement foot plate TiLite ships with their chairs.
You can replace your original screws, if you end up stripping them out, with some M6x25mm screws from Amazon. https://www.amazon.com/dp/B0GV3ZM816 There are likely better and less-expensive options so be sure to shop around.
If you need to forcibly remove your existing screws, you can use a dremel with a metal cutter wheel and cut between the tongues (usually hidden under the plate) Took me no effort at all to cut through both screws since mine appeared to be glued in.
Will be posting the .blend soon as I clean it up.