Suspended tealight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
candle holder string art model
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
Check out the print timelapse and support removal video here.
I recommend using LED tealights. I have tested it with real tealights too without any issues, but keep in mind: PLA is not fire-safe. Use real tealight only at your own risk.
This print is pretty difficult to set up properly so please just use the prepared 3mf file that contains custom supports and all necessary settings.
Not scalable. Must be printed with 0.2mm layer height.
Be very careful when removing the support. I recommend using pliers to break off each branch one-by-one.
Commercial License:
You can subscribe for a commercial license membership on my Patreon.