QMX+ Protective End Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective end covers for the QRPLabs QMX+ Transceiver
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Front and Rear panel end covers for the QRPLabs QMX+ Transceiver (for the official aluminium enclosure)
These simply slide onto the front and back of the QMX+ and fully cover all controls and ports.
Print out of a squishy material for extra protection. In the images you can see them printed out of Siraya Tech TPU Air Green at ~240C and 0.88 density, 1mm top and bottom surfaces and 20% Support Cubic infill. You can print it out of anything really, if you just want to protect it in transit, inside a bag, etc... Flexible filaments will perform better against drops and such, though that might not matter for most users.
The strap connecting the two caps is just a piece of the same filament, I like it to help keep both covers together when removed.