Color Pi - A Cheap Streamline Colorimeter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is Colorimeter design to use in classroom -cheap to make -can standby in 30-34 celsius ambient temperature(i hate…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Colorimeter design to use in classroom
-cheap to make
-can standby in 30-34 celsius ambient temperature(i hate you sun)
-withstand torturing from students
-use normal cuvette
use code from this http://www.instructables.com/id/An-Inexpensive-Photometer-and-Colorimeter/
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
50
Notes:
Pla
Post-Printing
must paint colorimeter_module.stl's cuvette insert and inside of colorimeter_lid.stl to matte black
Printing
top.stl x1
Bottom.stl x1
left.stl x1
right.stl x1
front.stl x1
rear.stl x1
top-cap1.stl x4
top-cap2.stl x4
pillar.stl x3
pillarUSB.stl x1
foot.stl x4
colorimeter_lid.stl x1
colorimeter_module.stl x1
colorimeter_top.stl x1
Hardware
TCS34725 module x1
Raspberry Pi x1
Jumper cable x1
M3 Screw 8mm or longer x16
M3 Nut x16
Category: Learning