Color Pi - A Cheap Streamline Colorimeter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Colorimeter design to use in classroom -cheap to make -can standby in 30-34 celsius ambient temperature(i hate…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Colorimeter design to use in classroom
-cheap to make
-can standby in 30-34 celsius ambient temperature(i hate you sun)
-withstand torturing from students
-use normal cuvette
use code from this http://www.instructables.com/id/An-Inexpensive-Photometer-and-Colorimeter/
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
50
Notes:
Pla
Post-Printing
must paint colorimeter_module.stl's cuvette insert and inside of colorimeter_lid.stl to matte black
Printing
top.stl x1
Bottom.stl x1
left.stl x1
right.stl x1
front.stl x1
rear.stl x1
top-cap1.stl x4
top-cap2.stl x4
pillar.stl x3
pillarUSB.stl x1
foot.stl x4
colorimeter_lid.stl x1
colorimeter_module.stl x1
colorimeter_top.stl x1
Hardware
TCS34725 module x1
Raspberry Pi x1
Jumper cable x1
M3 Screw 8mm or longer x16
M3 Nut x16
Category: Learning