Emergency SOS Warning Stake / Trail Marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed SOS stake for outdoor emergencies. High-visibility drop design with a hole for secure lanyard attachment.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
## Safety First: Emergency SOS Warning Stake
This is a 3D-printable Emergency Warning Stake, designed to be a vital addition to your outdoor gear. Whether you are hiking, camping, or exploring remote areas, this stake serves as a clear, unmistakable visual signal to alert others in case of an emergency or need for assistance.
### Key Features:
* Universal SOS Signal: Featuring a distinct teardrop design with "SOS" prominently debossed, it is instantly recognizable as a call for help, even from a distance.
* High Visibility: Optimized for printing in vibrant colors like Safety Yellow or Emergency Red to contrast sharply with natural environments.
* Secure Attachment: Includes a dedicated hole near the tip to accommodate a cord, lanyard, or carabiner, allowing you to secure it to your backpack, stick it in the ground, or hang it from a branch.
* Compact & Lightweight: Designed to be easily packed without adding significant weight to your kit.
### Ideal For:
* Marking your location on trails.
* Signaling distress in camps.
* Outdoor safety kits.
Stay safe on your adventures!
---
## Print Settings & Recommendations
### Material:
I strongly recommend using a weather-resistant and durable material:
* Recommended: PETG, ASA, or ABS (for outdoor durability).
* Optional: PLA (only if you understand it may degrade or warp in extreme heat/sun over time).
### Visibility:
Print in a High-Visibility Color (Safety Yellow, Emergency Red, Orange).
### Slicer Settings:
* Layer Height: 0.2mm or 0.24mm.
* Infill: 20% - 30% (Grid or Gyroid recommended for strength).
* Perimeters (Walls): 3 or 4 (essential for structural integrity when stuck in ground).
* **Supports:** No supports needed.
### Post-Printing:
Add a brightly colored cord or lanyard through the hole to facilitate ground fixation or carrying.