Magnetic Case for SlimmeLezer+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a magnetic case for the SlimmeLezer+
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I just wanted a magnetic case that sits neatly on the outer steel electric box!
The magnets I have used for the case is 2.7 x 6.05 mm (they were sold as 3 x 6 mm). I decided to go for 10 magnets to get a strong force holding the case. (The cavity is modeled as 2.8 x 6.25mm).
Heads up to put the pause where needed!
With 0.2 mm layer height the pause have to be added at layer 16. I printed mine with variable layer height to get a faster print - just make sure to put it on the right layer when inspecting slicing.
After i took the photo of the case I printed, I made some adjustments.
Added 0.2 mm to USB slot width
Rounded profile has initially steeper angle for better finish
Rounded profile goes all around top (instead of different profile on top) for better finish
Added chamfer on outer connector-side
