1 / 1
Magnetic Case for SlimmeLezer+ — image 1

Magnetic Case for SlimmeLezer+

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a magnetic case for the SlimmeLezer+

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

I just wanted a magnetic case that sits neatly on the outer steel electric box!

The magnets I have used for the case is 2.7 x 6.05 mm (they were sold as 3 x 6 mm). I decided to go for 10 magnets to get a strong force holding the case. (The cavity is modeled as 2.8 x 6.25mm).

Heads up to put the pause where needed!
With 0.2 mm layer height the pause have to be added at layer 16. I printed mine with variable layer height to get a faster print - just make sure to put it on the right  layer when inspecting slicing.

After i took the photo of the case I printed, I made some adjustments.

  • Added 0.2 mm to USB slot width

  • Rounded profile has initially steeper angle for better finish

  • Rounded profile goes all around top (instead of different profile on top) for better finish

  • Added chamfer on outer connector-side