Eggscalibur Fridge Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Whoever pulls this pan from the fridge shall be crowned king of breakfast! A fun sword skillet magnet print.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
"I shall call you Eggscalibur."
Rule your kitchen with legendary culinary power! Eggscalibur combines a classic sword hilt with a skillet base to turn your refrigerator into the ultimate knightly armory.
Two Model Options Included:
2-Piece Version: Prints completely support-free in separate parts (pan and hilt) for flat, easy printing and quick glue assembly.
1-Piece Version: Prints as a single solid model (requires light supports under the hilt extension).
Magnet Ready:
Features two recessed insets on the underside of the pan designed specifically for 3mm x 2mm round neodymium magnets (press-fit or a small drop of superglue).
Dimensions
Total Length: 1.91 in (~48.5 mm)
Total Height: 0.20 in (~5.0 mm)
Pan Diameter: 1.30 in (~33.0 mm)
Hilt Length: 1.26 in (~32.0 mm)
Print Settings
Orientation: Print flat side down on the build plate.
Supports:
2-Piece Model: None required!
1-Piece Model: Organic / Tree supports recommended under the floating hilt sections.
Material: PLA
Layer Height: 0.12mm (recommended for crisp text detail)
Infill: 20%+ (Gyroid or Grid pattern).