Six Color Benchy | INDX 8 Tool Multicolor Benchmark
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The classic 3DBenchy, split into six bodies so your toolchanger can print it in six colors with almost no purge waste. P
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The 3DBenchy split into six separate bodies, one per color, for toolchangers that can keep six materials loaded at once. Full six-color version: INDX with the 8-tool kit on a CORE One or CORE One+.
Each color sits on its own nozzle, so there is no prime tower and the waste per swap stays tiny.
On a Prusa XL you have five toolheads, and MMU3 gives you five filaments.
Merge two of the six bodies into one color and the print works fine.
The colors are assigned per body, so you are free to decide which two share a nozzle.
This is also a hard test of how cleanly your machine handles a lot of repeated tool changes
If the color boundaries stay sharp and the surface stays clean, your setup is dialed in.