Rear lens cap for Minolta MC & MD manual focus lenses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rear lens cap for Minolta MC & MD manual focus lenses, optimized to print without supports on FFF/FDM machines.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updates
09/2026: Added two more alignment markers due to symmetry and adjusted the logo angle (v1.4).
Description
A rear lens cap for Minolta MC & MD manual focus lenses, optimized to print without supports on FFF/FDM machines. The design is available with a classic 60s logo, a modern 80s logo and without a logo. All three versions feature alignment markers (▶, an arrow should point to the red dot when putting on the cap).
Two color printing for contrasted markings is possible: Switch after two layers (above 0.4 mm).
Print settings
Layer height 0.2 mm
Line width 0.4 mm
3 wall lines
Infill 15-20%
5 top & 4 bottom layers
Supports not required
Approximate print time @ 60 mm/s: 0:55 h