1 / 1
Rear lens cap for Minolta MC & MD manual focus lenses — image 1

Rear lens cap for Minolta MC & MD manual focus lenses

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A rear lens cap for Minolta MC & MD manual focus lenses, optimized to print without supports on FFF/FDM machines.

Rating
5 / 5
Likes
2
Downloads
27
Makes
0
Views
66
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Updates

  • 09/2026: Added two more alignment markers due to symmetry and adjusted the logo angle (v1.4).

Description

A rear lens cap for Minolta MC & MD manual focus lenses, optimized to print without supports on FFF/FDM machines. The design is available with a classic 60s logo, a modern 80s logo and without a logo. All three versions feature alignment markers (▶, an arrow should point to the red dot when putting on the cap).

Two color printing for contrasted markings is possible: Switch after two layers (above 0.4 mm).

Print settings

  • Layer height 0.2 mm

  • Line width 0.4 mm

  • 3 wall lines

  • Infill 15-20%

  • 5 top & 4 bottom layers

  • Supports not required

Approximate print time @ 60 mm/s: 0:55 h

Tags