P
Printablesiohn
Grip for Minolta X-700
A grip for the Minolta x-700. The pictures show the grip with additional leather to increase grip.
- Downloads
- 63
- Likes
- 5
- Rating
- 0
Search results: minolta
Counting matching models…
P
PrintablesAerocats
Minolta Camera 16mm Film Cartridge
Minolta Camera 16mm Film Cartridge Printer: Bambu P1P Nozzle: 0.4 Profile: 0.12mm Fine @BBL P1P Filament: Overture PLA, Black Model must be printed using a 0.3mm wall width to insure that the fit tolerance is maintained.…
- Downloads
- 824
- Likes
- 51
- Rating
- 5
P
PrintablesProfHankD
Minolta SR/MC/MD Rear Lenscap
This is a simple, but elegant, rear lenscap for Minolta SR (also known as MC and MD) mount lenses. These lenses were used on Minolta SLRs from 1958 on, but were essentially orphaned after Minolta moved to an autofocus mount in 1985…
- Downloads
- 500
- Likes
- 40
- Rating
- 4.83
P
PrintablesNahuel
Minolta MC/MD Body Cap with Logo
Fixed a difference with the original design. Made it from the ground up with correct measurements for my camera Category: Camera
- Downloads
- 432
- Likes
- 35
- Rating
- 5
P
PrintablesBLKFSH
Beefy Minolta/Sony A-mount Body Cap
I saw this cool body cap that Codiac2600 made for their Sony Alpha camera. Sadly this camera has an E-mount and the Minolta Alpha 9 I just got uses the slightly larger A-mount. Since the model was modular I decided to take the actual…
- Downloads
- 341
- Likes
- 20
- Rating
- 5
P
PrintablesOmega-TI
Minolta AF to Canon EF Lens Adapter
I no longer use my Minolta Maxxum 7000 because it's a film camera. If you are like me and have a substantial investment in AF lenses that you want to put back into service for your newer Canon that uses EF lenses, this is an awesome and…
- Downloads
- 311
- Likes
- 19
- Rating
- 0
P
Printablesnotyahc67
Sony/Minolta A-Mount Camera Body Cap Cover
I needed a body cap for my Sony A390 DSLR camera so I decided to make one! I tried a few other models but wanted something smaller. I also decided to add the alpha logo and a label on the inside. I've included three models: Blank Front…
- Downloads
- 256
- Likes
- 9
- Rating
- 5
P
PrintablesJoao Martins
Minolta MD Rokkor 50mm 1:1.7 Front Lens Cover - ø 55mm
Front lens cover for the 1977 Minolta MD Rokkor 50mm 1:1.7 with a filter diameter of 55mm. When you're thrifting vintage lenses, it's not uncommon to find lenses for sale without a front cover, a back cover, or both. I recently found…
- Downloads
- 222
- Likes
- 15
- Rating
- 5
P
PrintablesTHE YOOPER
Minolta X-700 Camera Grip
This is a grip I made for the Minolta X-700. It screws into the tripod threads with a half inch 1/4-20 USC flat head slotted screw. The the grip in the photo was sanded, painted, and finished with a 2k clear coat.
- Downloads
- 200
- Likes
- 23
- Rating
- 4.5
P
PrintablesS. ayres
M42 to A-Mount (Minolta, Sony) Lens Adapter
I wanted to use my M42 lens in my old Minolta 7000 Maxxum (a-mount) and the original model ( https://www.thingiverse.com/thing:5414627 ) was exactly what i needed except the top part was too big for my lens, so i ended up learning how to…
- Downloads
- 192
- Likes
- 9
- Rating
- 0
P
PrintablesProfHankD
Locking Minolta SR/MC/MD Lens To Canon FL/FD/FDn Body Adapter
Minolta's manual-focus SLR lens SR bayonet mount was introduced in 1958 and continued as the compatible MC and MD mounts through 1998. In 1964, Canon introduced the FL lens mount for their SLRs and continued with the compatible FD mount…
- Downloads
- 175
- Likes
- 19
- Rating
- 0
P
PrintablesBobeca
Old Minolta lens to Canon EF mount
This is a conversion ring for old Minolta lenses to Canon EF mount. The conversion is not direct and requires modifications to the lens as well. More information is available at the video. Print with high strength materials - ABS, ASA or…
- Downloads
- 164
- Likes
- 13
- Rating
- 0
P
Printablesguidosenff
Nikon Z 70-200 F2.8 film scanner + Minolta Dimage Scan Dual III AF-2840 film holder trays
I needed a way to scan 126 cinematic film, which has the same film height as a 35mm film, but the image area is taller than the one in 35mm film and the frame has a square aspect ratio. I own a Minolta Dimage Dual III AF-2840 scanner and…
- Downloads
- 151
- Likes
- 29
- Rating
- 0
P
PrintablesProfHankD
Minolta SR/MC/MD Lens To Canon FL/FD/FDn Body Adapter
Minolta's manual-focus SLR lens SR bayonet mount was introduced in 1958 and continued as the compatible MC and MD mounts through 1998. In 1964, Canon introduced the FL lens mount for their SLRs and continued with the compatible FD mount…
- Downloads
- 146
- Likes
- 19
- Rating
- 0
P
Printablesandrew_makes
Minolta Rokkor Inner Lens Cap
The model mimics the original Minolta inner lens cap. Printed it myself on a bambu lab x1, but following settings should work on all printers: - Material TPU (used eSUN eTPU-95A) - 0.2 layer height - 3 wall loops and 40% infill with GRID…
- Downloads
- 133
- Likes
- 12
- Rating
- 4.6
P
PrintablesMarynowane
Sony/Minolta Mount Rear Lens Cap
Rear lens cap for A/AF/alpha-mount lenses from Thingverse https://www.thingiverse.com/thing:4594516
- Downloads
- 131
- Likes
- 19
- Rating
- 0
P
PrintablesSteph ANTHONY
Minolta SR to EF adapter
This adapter allows to use a Minolta SR lens on a EF or EF-s camera don't allow infinit focus, macro only
- Downloads
- 119
- Likes
- 17
- Rating
- 5
P
PrintablesProfHankD
Minolta SR/MC/MD Lens To Leica M Body (Techart Pro LM-EA7) Adapter
Minolta used to be one of the more popular brands of 135 film SLRs and lenses. In fact, they were one of the very few lensmakers making their own glass, and their lenses are well known for exceptionally consistent color -- they famously…
- Downloads
- 116
- Likes
- 7
- Rating
- 0
P
PrintablesKirill S
Minolta/Sony A-mount Aperture Key
This is a aperture key for Minolta/Sony A-mount lenses that allows you to manually adjust and hold aperture in a lens. This should be useful for people using cheapest macro extension tubes ( like this ones that I use ) or using…
- Downloads
- 100
- Likes
- 12
- Rating
- 0
P
PrintablesSpotmatic
Version 1: Lens cap for TLR with mounted filter, bayonet 1 (Aires reflex, Rolleicord, Rolleiflex, Yashica, Minolta)
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
- Downloads
- 95
- Likes
- 11
- Rating
- 0
P
PrintablesB_unit
Minolta Hi-Matic F Battery Spacer
The Minolta Hi-matic F camera requires PX640 batteries which are no longer produced. It is possible to use 2x LR44 batteries and a battery spacer. You need some thin single core wire (0.44 mm diameter). Stitch the wire through the holes…
- Downloads
- 92
- Likes
- 8
- Rating
- 5
P
PrintablesKebin W
Minolta SRT Battery Cap
Replacement battery cover for Minolta SRT. Use a piece of foil to make it conductive. Make sure the foil “spills” over onto the threads. Tested on my SRT-102 and it works fine. made this pretty quickly though. there are a few things that…
- Downloads
- 92
- Likes
- 5
- Rating
- 0
P
PrintablesSpotmatic
Minolta Flashmeter III Spherical Diffuser holder and Reflected Light disc
My spherical diffuser attachment was broken so I replaced the broken parts with this construct. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 20 Filament: Prusa PETG black…
- Downloads
- 89
- Likes
- 4
- Rating
- 5
P
Printablesgeneric0000
Minolta SRT Advance Lever Cover
This replaces the often broken/missing plastic cover for the advance lever of Minolta's SRT series of cameras. Just print and glue. I recommend using STEP files for printing, but an .stl is included for compatibility. I'm also including…
- Downloads
- 87
- Likes
- 4
- Rating
- 5
P
PrintablesTommy Meehan
Minolta Hi-Matic F Lens Cap
A simple lens cap for Minolta Hi-Matic F with Minolta Logo with 48mm outer diameter lenses. Depth 3.25mm. Supports: Yes Resolution: 0.12 Infill: 15% Grid Filament material: PLA
- Downloads
- 84
- Likes
- 4
- Rating
- 0
P
PrintablesProfHankD
Minolta/Konica-Minolta/Sony A Lens To Leica M Body (Techart Pro LM-EA7) Adapter
In 1985, Minolta became the first company to produce a body-driven autofocus 35mm SLR -- the Maxxum 7000 -- and with it, the new A (also called Alpha or AF, replacing the incompatible manual-focus SR/MC/MD) mount became the camera system…
- Downloads
- 79
- Likes
- 9
- Rating
- 0
P
Printablesleon_visuals.est2021
Side Grip for a Minolta SRT 101
This is a side grip for a Minolta SRT 101. I've found that holding older film cameras is somewhat uncomfortable because many of them do not have a side grip, so I decided to make my own. The positioning of the holes will vary based on the…
- Downloads
- 77
- Likes
- 9
- Rating
- 3
P
PrintablesPhilip Stanz
Minolta 49mm Lens Cap Spring
This is a replacement spring for a Minolta 49mm lens cap as found on my Maxxum Lenses. This will replace a broken spring and should be printed with 100% infill and in PETG for the flexibility. I've tested this in a Maxxum 35-70mm Lens as…
- Downloads
- 77
- Likes
- 11
- Rating
- 0
P
Printablesbostwickenator
Minolta 7000 BH-70U (USB) Lipo Battery Holder
A replacement battery holder for the Minolta 7000 that brings it into the rechargable age. Full build instructions available here. http://dev-with-alex.blogspot.com/2016/05/minolta-7000-battery-upgrade.html Category: Camera
- Downloads
- 75
- Likes
- 12
- Rating
- 5
P
PrintablesKebin W
Minolta Hi-Matic 7s Battery Cap Cover v1
Lost my battery cap cover. Added some folded up aluminum foil into the battery cavity to make sure the top of the battery makes contact with the threads and the meter functions! I printed it in PETG at 15% infill and 0.1mm layers
- Downloads
- 74
- Likes
- 4
- Rating
- 0
P
Printablesbostwickenator
Minolta 7000/9000 Eyecup
This is a little bumper for the viewfinder. I don't know if Minolta ever made an official version of this but I tried to keep it in the angular 80's futurism style of the camera. Category: Camera
- Downloads
- 66
- Likes
- 4
- Rating
- 0
P
Printablesscrewdiver
Minolta HI-MATIC F battery compartment cover
Lost the battery cover for your Minolta Hi-Matic F analog camera? I got you covered :) Printed with PETG snugs 100% but I guess PLA will work just as good.
- Downloads
- 63
- Likes
- 7
- Rating
- 5
P
Printablesivanzegt
Minolta AF to Samsung NX (With aperture control)
Quick remix changing the AF to E adapter to an AF to NX adapter. Removed 7,5 mm from body to change flange distance and changed E flange to NX Flange. Flange will need to be screwed in from inside of the main adaper part. Prints fine at…
- Downloads
- 60
- Likes
- 10
- Rating
- 0
P
Printablesandrew_makes
Minolta SR mount cap
Following settings should work on all printers: - Material: TPU (used eSUN eTPU-95A) - 0.2 layer height - 3 wall loops and 40% infill with GRID pattern
- Downloads
- 54
- Likes
- 7
- Rating
- 5
P
PrintablesMacrony
Minolta MD to C-mount variable extension adapter
Remix to attach old MD Minolta camera lenses to a chinese USB microscope camera with C-mount thread. You will need use the "Amscope SM trinocular tube to C-mount adapter" by zbrozek https://www.thingiverse.com/thing:3563703/files to…
- Downloads
- 54
- Likes
- 4
- Rating
- 0
P
PrintablesLusvit
Minolta X-700 Low-Profile Eyecup
Minolta X-700 eyecup. Should fit other X series Minolta cameras as well. Worked well with PLA+ and TPU 95A (with 100% infill), should probably work fine with other non-abrasive filaments.
- Downloads
- 53
- Likes
- 6
- Rating
- 5
P
PrintablesChris
16mm Minolta Plustek Carrier
Copied from original model. Has been printed and tested. Printing I recommend to use matte black filament, to reduce scatter lights from the scanner lamp while scanning. No need to use supports, but use brims if your filament is prone of…
- Downloads
- 53
- Likes
- 4
- Rating
- 0
P
PrintablesLusvit
Minolta AF-S Quartz Auto Focus D Lens Cap
Mine didn't have one, so I've made it!
- Downloads
- 44
- Likes
- 1
- Rating
- 0
P
PrintablesOddlyCinematic
Minolta XD11/XD7 Grip
Requires a 1/4 20 screw and M3 Socket head with nut to fit to the camera. Since I used the strap lug to secure the grip I replaced it with two standard size camera strap triangles that allow a camera strap to be fixed to the grip side of…
- Downloads
- 44
- Likes
- 6
- Rating
- 0
P
PrintablesPan_Barszczyk
SONY/Minolta E mount to M40x0.75 adaptor
If you are using a slicer with variable layer height make only first 5 mm with 0.1mm layers, the rest can be 0.2mm (printing with the thread down). Print Settings Printer: Craftbot2 Rafts: No Supports: No Resolution: 0.1mm Infill: 10%…
- Downloads
- 43
- Likes
- 9
- Rating
- 0
P
PrintablesJezzaWalker
Minolta Color Enlarger Mod-III 35mm and 120 Film Carriers
My Minolta enlarger came without film carriers for 35mm, so I made some! I thought I'd share the files on the off chance someone else out there has one of these. The files come in four parts: Upper and lower halves, and two guide rails.…
- Downloads
- 43
- Likes
- 5
- Rating
- 0
P
PrintablesCarson Hindsman
Minolta/Sony A-Mount to E-Mount with aperture control
Materials Required: M2x10 Screws https://www.amazon.com/M2x10-Button-Socket-Screws-Stainless/dp/B07QFW5D2V M2 Inserts…
- Downloads
- 42
- Likes
- 7
- Rating
- 0
P
PrintablesThe Jorki
minolta af to canon ef adapter
This model is minolta af to canon ef adapter for canon eos ef
- Downloads
- 39
- Likes
- 4
- Rating
- 0
P
PrintablesDatalla
Minolta A to RF adapter
Experiment with new lens combinations and pair any Sony A (Minolta AF) mount lens with your Canon RF mount camera. A-RF Lens Mount Adapter is manual so most automatic functions – aperture, autofocus, AE metering and image stabilisation –…
- Downloads
- 38
- Likes
- 2
- Rating
- 0
P
Printablesswoopyfpv
Minolta MD to L-Mount Adapter
Made a quick Adapter for checking my lens, far from perfect, but did the job for me. !! On my print, everything fit snug, the Minolta lens does not get locked, so you need to be careful !! !! As there might be a bit of abrasion when…
- Downloads
- 38
- Likes
- 3
- Rating
- 5
P
Printablesdaiceman
Minolta AF-Tele Shutter Button
A replacement for missing or broken shutter button for Minolta AF-Tele 35mm Film Camera. This design makes use of a 4mm diameter spring to keep the button pushed up. I took a 4mm diameter spring from a ballpoint pen and cut it to be about…
- Downloads
- 37
- Likes
- 0
- Rating
- 0
P
PrintablesKebin W
Minolta CLE Grip
Modeled a grip for the Minolta CLE. I modeled it after the OEM grip. Will need a screw to secure into the baseplate. Go into a hardware store and figure that one out please. Fits mostly well. Print it upright with no supports.
- Downloads
- 36
- Likes
- 2
- Rating
- 0
P
Printablesviteo
Minolta SR-T 101 Master Gear
I've successfully repaired my Minolta SR-T 101 camera with this gear. (tough 2000 SLA)
- Downloads
- 34
- Likes
- 2
- Rating
- 0
P
PrintablesInteresting_Bear_184
Minolta 49mm lens cap clip
When I got my camera, it came with a lens cap, but only half a clip. I used that clip and reproduced a complete clip that would grab onto the 49mm Rokkor lens thread, and matched the styling of the original clip. Printing recommendations:…
- Downloads
- 33
- Likes
- 3
- Rating
- 0
P
PrintablesKebin W
Minolta Hi-Matic 7s Focus Ring Grips
Replace the old white focus ring grip with this larger one. First version is a hill & valley style. Printed on it's side. Second version is a tab. Printed at 0.2mm layer, with supports, and flat with the tab pointed skyward.
- Downloads
- 33
- Likes
- 1
- Rating
- 0
P
PrintablesSpotmatic
Version 2: Lens cap for TLR with mounted filter, bayonet 1 (Aires reflex, Rolleicord, Rolleiflex, Yashica, Minolta)
Version 2 – Lens Cap for TLR (Bayonet 1) with Mounted Filter With this design you can keep your filter on and simply place the lens cap over it to protect your TLR lens. Compatible with TLR Bayonet 1 (Aires Reflex, Rolleicord, Rolleiflex…
- Downloads
- 31
- Likes
- 7
- Rating
- 0
P
PrintablesDamian
Minolta AF Reflex 500 Front lens cap
I made this front lens cap for my Minolta AF Reflex 500 f/8. I don't always carry the quiver/carry case it originally came with and wanted a simple lens cap for it. The inside is slightly tapered to allow is to easily slide on and stay on…
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
PrintablesB_unit
Minolta Hi-Matic F Film Winder Knob
Minolta Hi-Matic F Film winder knob. I bought a camera with a broken film winder knob. I have made this as a replacement. It should be printed with a 0.25mm nozzle The File contains two parts, do not for to split it up in Slicer.
- Downloads
- 30
- Likes
- 5
- Rating
- 0
P
Printablesjk_printer
Rear lens cap for Minolta MC & MD manual focus lenses
Updates 09/2026: Added two more alignment markers due to symmetry and adjusted the logo angle (v1.4). Description A rear lens cap for Minolta MC & MD manual focus lenses, optimized to print without supports on FFF/FDM machines. The design…
- Downloads
- 27
- Likes
- 2
- Rating
- 5
P
PrintablesFresh.Dumble
Lenscap for Minolta AF-50
Replacement for lost Lenscap. Fits on the Minolta 50mm Prime. Should also fit on the non AF Variant.
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
Printablesx3me
Sony A Mount Minolta Lens bay Gridfinity
I only found lens holders for the E-Mount but also wanted to store my A-Mount lenses organized, so I made my own
- Downloads
- 26
- Likes
- 4
- Rating
- 0
P
Printablesmaskedman
Sony / Minolta Flash Terminal Port Cover
The rubber terminal port cover which protects the accessory port and external battery connection on my Minolta 5600HS flash broke. I modeled a cover to protect the two ports from debris. 0.4mm nozzle Layer height: 0.2mm 3 perimeters…
- Downloads
- 25
- Likes
- 4
- Rating
- 0
P
PrintablesPNKT
Camera lens aperture opener for A-mount(Sony-Minolta)
By putting it on like a lens cap on the mount side, the aperture can be opened and the condition of the lens can be easily observed.
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesSol2Studio
Frame for film scanner Minolta Dimage Scan Dual III
Frame for the Minolta Dimage Scan Dual III film scanner. There is a working scanner for 35mm film in the warehouse, but the frame for negatives is missing. One frame smaller than the original, so it fits on the printer. The first frame is…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesRimantas Petrauskas
Minolta XG2 Times Two
It is a simple conversion, takes some adjusting of Minolta XG2 body, made it some time ago and i just took out mirror box with some other parts, by leaving advance mechanism. Lens i was using from a cheap folding 6X9 camera, so it can be…
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesGuillaume H.
Manivelle Minolta X-500
Manivelle pour appareil photo argentique Minolta X-500
- Downloads
- 19
- Likes
- 4
- Rating
- 0
P
Printablesnotyahc67
Minolta SR and SRT Series PX625 to SR44 Adapter
The Minolta SR and SRT series of cameras originally used a PX625 1.35V mercury oxide battery to operate its light meter. This battery is no longer produced because it contains mercury. A common modification to get the light meter working…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesFrankB
Minolta compact binocular caps
Easy TPU print for replacement lens covers. Since the case fell apart, it needed something.
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesGerald Fraas
Minolta/Sony A Lens to Canon M Adapter
Found a cheap, but high quality lens, at a thrift shop that you're hoping to mount onto your Canon M (5, 50, etc.)? Here's a tool. This mounts Minolta/Sony A mount lenses to the Canon M Body. The lock mechanism does work pretty well for…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
Printablesrobotmay
Minolta Lens Cap Replacement Squeezy Bit, 49mm
This is a replacement for whatever you call the bit that sits inside these late-era Minolta lens caps. This cap came from an MD-mount 28mm f/2.8 from the X-700 era, and the sprung plastic had predictably failed. This cap is a 49mm one,…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesTanako
Minolta 200mm F 4.0 inner sleeve
In meinem altem Minolta 200mm F4.0 Objektiv hat eine Innenhülse aus Kunststoff deutliche Anzeichen des Materialverschleiß gezeigt. Das Problem scheint durchaus häufiger aufzutreten. Der Kunststoff bildet dabei an der Oberfläche eine Art…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesMikeJewski
Konica Minolta LS-100 embossed replacement plate
Embossed replacement plate for LS-100 Luminance Meter. Plate was attached to the body via super glue, and then painted. Onshape model can be found here:…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesZuccs
Canon EF-M to Minolta AF (Sony AF) With Aperture Control
2026-01-08 UPDATE: Minolta-Mount-M3 files were added for use with M3x10-20 countersunk screws (tested only with the Canon mount V2 due to limits of the Hex nuts being bigger than the inserts) instead of M2.5. This should provide greater…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesFlattestcap
Minolta AF-Sv Talker Lens Cap
I removed the threads/ridges of the 40.5mm cap and added a conical wedge to engage the lip around the lens of the Talker. It works surprisingly well. I was surprised, anyway. Printed at 0.15mm layer heights, no supports. Broke the parts…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
Printables63alfred
Minolta AUTOCORD TLR Lens Caps
Used camera, with a remarkable remarkable ROKKOR 75mm, f 3.5 lens, came without case or lens covers from a local camera swap. Alas, I printed some. Thickness of top and bottom caps must be different, bottom lens cap is thinner due to…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesMatthew Sylvester
Minolta SRT film advance lever thumbrest
A basic replacement plastic piece for the film advance lever on a Minolta SRT camera. Mine was dropped and fell off somewhere, so I made this one as a replacement. It has some ribbing to make the lever a little more grippy against your…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesMarica
Minolta HI-MATIC F battery adapter
An easy-to-print battery adapter for your Minolta Hi-Matic F rangefinder. Once printed, simply insert two LR44 (or SR44) batteries into the adapter, place it inside the camera's battery compartment, and you’re ready to shoot! Important…
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesMarek Vojta
Button Label Frame for Konica Minolta Bizhub C258
This is a 3D printable label frame designed for the control panel of the Konica Minolta Bizhub C258 multifunction printer. It helps users clearly identify the most used buttons – "PRINT" , "SCAN" , "COPY" , and the numeric keypad – by…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
Printables555555513 23123
Lens hood for Minolta AF 24mm F2.8
Lens hood in diffirent sizes Printed with supports and 8+ perimeters Best to print with something UV resistant like ABS
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesDaszekdahu
MINOLTA AUTOCORD COLDSHOE ADAPTER
Remixed from that https://www.printables.com/model/888719-coldshoe-90deg-adapter
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesAttishu
Konika Minolta Color Reader cr-10 battery cover replacement
It covering the four AA battery compartment. Printed with PLA, bend with airgun (110 Celsius) and used for a while. Not perfect, but working model. Cad model included for further impruvement, if you bored. Check our Youtube channel:…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesProfHankD
Rodenstock Omegaron 135mm f/4.5 to Minolta SR/MC/MD adapter
There are a lot of cheap enlarging lenses that work quite well as taking lenses, and the Rodenstock Omegaron 135mm f/4.5 is one of the most appealing I've found. Even wide open, this designed-for-4x5 lens manages to give crisp details on…
- Downloads
- 8
- Likes
- 3
- Rating
- 0
P
Printablesjdbär
Minolta XG-M Arca Swiss base plate
Arca Swiss base plate for a Minolta XG-M
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablesryan1894
Gridfinity Lens Holder for Minolta MD/MC/SR
Highly inspired by the drewwwau holders but didn't use his files. Was built originally for Kallax Gridfinity 6x7, so didn't find that much use for the 2x2 (holds 5) holder, since it leaves the last row empty anyway.
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesOryx_taker
Minolta MD lens cap with red dot
Lens cap for minolta MD lens with the space to use red filament to mark where to screw the cap
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesRayfor
Ground Glass probe for Minolta Booster 2
Also need a D = 5mm transparent pin for light transmission
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
Printablesrobotmay
Minolta XD7/XD11 Film Indicator Fixing
If you're restoring or repairing a Minolta XD7/XD11, you might need to remove the film indicator window in order to better replace the original grips/leatherette. This involves cutting the plastic nubs that go through the door, as the…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesNiran van den Ende
2x4 Gridfinity 42mm Sigma 70-210 Minolta MD bin
Recently I got the gridfinity fever and I started to create some bins for my photography drawer. This model uses a 2x4 grid (42mm standard gridfinity size) to create a nice little bin for a Sigma 70-210 zoom lens. Mine in particular has…
- Downloads
- 5
- Likes
- 2
- Rating
- 0
P
PrintablesPablo Ledesma
Lens cover for Minolta Spotmeter
PTU I added 2 models one fits better than the other. Print both in case of doubt.
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesMalinarium
Minolta Rising Sun Hot Shoe Cover
A cover for a camera hot shoe with the Minolta "rising sun" logo. Although this and other covers are primarily cosmetic, they do protect the hot shoe contacts. Please note that the thinner parts of the logo might not come out. Feel free…
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesTip's PolyForge
Konica Minolta Door Interlock Switch Actuator (AccurioPress C3080 / C3070 / C4080)
This is a functional replacement for the safety door detection actuator (interlock switch key) on a Konica Minolta AccurioPress C3080 production digital press. When the standard OEM plastic tab snaps or bends, the press will throw a…
- Downloads
- 5
- Likes
- 2
- Rating
- 0
P
PrintablesDaszekdahu
Minolta XD, XD7, XD11 Grip
Grip for Minolta XD, XD7, XD11 Printed from PETG - 70% infill, also printed from PETG-CF
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesOryx_taker
Minolta XD-s grip
So! This grip is for and tested on minolta XD-s, it's recommended to print on some pa-cf, after printing you should cover it with a polyurethane spray since it's not a good idea to hold in your hands carbon fibers. The grip is holded only…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesJMD64
Toanzmaker 2000 - Digital-to-analog Film recorder for Minolta 35-70 F4 lens
Have you ever think about “damn I wish I could've turn digital images into film negatives without using these silly fake filters”? Now here's the solution only like 3 people had been waiting for! Parts needed to assemble the full kit…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesTip's PolyForge
Konica Minolta Relay Unit RU Replacement Lever
A quick replacement for the notorious green RU jam clearance lever found inside Konica Minolta production presses with attached Relay Unit Modules. The original injection-molded parts frequently stress-fracture near the retention pin…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesKevDoy
Camera Mechanism Adapter for Tripod Mount - Sony, Minolta
Screws used: Xwell 1/4''-20 Slotted Screw, for Quick Release (QR) Plate or Camera Tripod Monopod (15 Pcs) https://www.amazon.com/dp/B08P6SV4CH Designed specifically for the Minolta DiMage A200 and Sony A330 however, I imagine other…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesJason Schwefel
Beseler 23C Negative Carrier – Minolta 16 (12 x 17) (Experimental)
⚠ Please Read the Instructions First These carriers work like the original Beseler carriers, but they are plastic, not metal, and plastic has to be handled differently. The included PDF walks through printing and assembly step by step.…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesQuoVadisDomine?
Gridfinity Lens Holder - Minolta Lens
This is a 2x2 Gridfinity holder for a Minolta MC Tele Rokkor-QD 135mm F3.5 lens, or any other similarly sized lens. It has an inner diameter of 63mm, so you can use that to determine if your lens will fit. I designed this to be used with…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printablesminigubben
Minolta X-300 S.T.-AEL button
This is a replacement for the S.T.-AEL button on Minolta X-300. It most likely work for other similar camera models as well. The 3 screws to remove the front plate are located underneath the 2 rubber grip pads which are glued on. Printed…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
PrintablesOryx_taker
Viewfinder cover for minolta xd-s
The difference between minolta xd and xd-s is xd-s replace the viewfinder cover with a adjustable eyepiece diopter. This model let's you cover the viewfinder of the minolta xd-s in case you want to take a long exposure and the light from…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
PrintablesJason Schwefel
Beseler 23C Negative Carrier – Minolta 16 (10 x 14) (Experimental)
⚠ Please Read the Instructions First These carriers work like the original Beseler carriers, but they are plastic, not metal, and plastic has to be handled differently. The included PDF walks through printing and assembly step by step.…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
PrintablesVico Günther
Minolta XG-M Lightweight Hand Grip
I deigned this lightweight hand grip specifically for the Minolta XG-M as a compact alternative to the original Minolta MD-1 motor grip. The MD1 is a great original accesory, but at around 500g it adds a lot of weight an bulkto the…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
PrintablesOryx_taker
Diopter for minoltas
You need 2 important things to make this diopter: A lens with your prescription made in a material which will be able to be laser cutter, I bought from aliexpress this one and I cuted it with a Beambox pro from the university. the…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
PrintablesNewties Ties
Caps for Minolta Compact EZ 8x21 7" binoculars
Print in TPU 95A Gyroid infill 25% 5 perimeters
- Downloads
- 1
- Likes
- 0
- Rating
- 0