1 / 2
Side Grip for a Minolta SRT 101
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a side grip for a Minolta SRT 101.
- Rating
- 3 / 5
- Likes
- 9
- Downloads
- 77
- Makes
- 2
- Views
- 464
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This is a side grip for a Minolta SRT 101. I've found that holding older film cameras is somewhat uncomfortable because many of them do not have a side grip, so I decided to make my own. The positioning of the holes will vary based on the camera, but I'm positive it is quite easy to modify to suit your camera.
- Printer brand:
Prusa
- Printer:
Mk2.5s
- Rafts:
No
- Supports:
Yes
- Resolution:
0.15
- Infill:
35
- Filament brand:
Hatchbox
- Filament material:
PETG
- Notes:
I used 4-5 perimeters with good results. You can get away with using PLA (my first drafts were out of PLA), but there is a decent amount of flex, which is why I switched to PETG.