Minolta MD Rokkor 50mm 1:1.7 Front Lens Cover - ø 55mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Front lens cover for the 1977 Minolta MD Rokkor 50mm 1:1.7 with a front filter diameter of 55mm.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 223
- Makes
- 3
- Views
- 967
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Front lens cover for the 1977 Minolta MD Rokkor 50mm 1:1.7 with a filter diameter of 55mm.
When you're thrifting vintage lenses, it's not uncommon to find lenses for sale without a front cover, a back cover, or both. I recently found myself in this situation, and after searching online, while I could find good models for a Minolta SR mount back cover, I couldn't find a vintage-style pressure fit front cover for this lens. The 1977 version of this lens accepts 55mm screw filters and has an external diameter of 57mm, and I expect it should work on the previous model of the same lens, the 1973 Minolta MC Rokkor-PF 50mm F/1.7, as it has the same outer diameter.
Alternatively, models of more modern looking lens caps are available and will work for this lens, like this one, which I have tested, but I was looking for a more vintage look and for a fun design challenge in figuring out the dimensional allowance that could create a satisfactory fit.
The fit is tight, but not overly tight that you need to press too hard on the moveable portion of the lens. All versions so far have been printed with PLA, but I did notice that its thermoplasticity is too high, as the fit became too loose once I let the cover sit in the sun for a few minutes. For this reason, I would recommend and probably will try to print it with less thermoplastic filaments like PETG or ASA.
The design includes the period-correct logo for when this lens was released.
Printing suggestion:
- 0.2 mm layer height
- 15% infill
- Ensure the dimensional accuracy of your printer is correctly calibrated through the “Extrusion multiplier”.
- Use “External perimeters first” option to help with dimensional accuracy.
- Random seam position, to prevent seams clustering and preventing goodness of fit in one position.
- Top and bottom fill pattern: Archimedean Chords.
- Bridging angle of 315°, to minimise bridging length inside the logo.
- No supports or brim necessary
PS: If you're looking for a good rear cap, I printed this one with good results.