Minolta SR and SRT Series PX625 to SR44 Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model adapts an SR44 silver oxide battery to fit in the Minolta SR and SRT series of cameras.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
The Minolta SR and SRT series of cameras originally used a PX625 1.35V mercury oxide battery to operate its light meter. This battery is no longer produced because it contains mercury.
A common modification to get the light meter working again is a diode mod. A 1N5711 Schottky diode is soldered in series with the battery holder and a 1.5V SR44 silver oxide battery is used instead. This is done because the diode's forward voltage drop with the meter's current consumption of 10uA - 200uA provides an output of approximately 1.35V.
The SR44 battery has a smaller diameter than the PX625 and lacks its ridge. This adapter slides around the SR44 matching the outside diameter of the PX625.
Note: You can use a 1.5V SR44 battery without doing a diode mod or adjusting the light meter. However, the meter will read several stops off and you will have to compensate.
Recommended Print Settings
0.1mm layer height
100% infill
