1 / 5
Minolta SR and SRT Series PX625 to SR44 Adapter — zdjęcie 1
1 / 5

Minolta SR and SRT Series PX625 to SR44 Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model adapts an SR44 silver oxide battery to fit in the Minolta SR and SRT series of cameras.

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
107
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

The Minolta SR and SRT series of cameras originally used a PX625 1.35V mercury oxide battery to operate its light meter. This battery is no longer produced because it contains mercury. 

A common modification to get the light meter working again is a diode mod. A 1N5711 Schottky diode is soldered in series with the battery holder and a 1.5V SR44 silver oxide battery is used instead. This is done because the diode's forward voltage drop with the meter's current consumption of 10uA - 200uA provides an output of approximately 1.35V.

The SR44 battery has a smaller diameter than the PX625 and lacks its ridge. This adapter slides around the SR44 matching the outside diameter of the PX625. 

Note: You can use a 1.5V SR44 battery without doing a diode mod or adjusting the light meter. However, the meter will read several stops off and you will have to compensate. 

Recommended Print Settings

  • 0.1mm layer height

  • 100% infill

Tagi