MDR-Z1R Driver Hanger and Pad Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the MDR-Z1R Headband and Cups Together
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Holds the MDR-Z1R Headband and Cups Together.
Mine broke, and I needed a replacement. Still requires manual cutting and drilling for the holes.
Personally, I use a soldering iron to create the hole and just press the screw in quickly. Works fairly well, and I recommend printing with 100% infill for strength and laying it down to optimize the load (which will result in more supports), but laying it high, in my experience, breaks easily.
I recommend printing in pairs; this is not a 1:1 copy; therefore, if it's using the OEM, it will not press correctly.
Threw in an extra Pad Holder file if you need, it works fine.
