1 / 4
MDR-Z1R Driver Hanger and Pad Holder — image 1
1 / 4

MDR-Z1R Driver Hanger and Pad Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holds the MDR-Z1R Headband and Cups Together

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial

Holds the MDR-Z1R Headband and Cups Together.

Mine broke, and I needed a replacement. Still requires manual cutting and drilling for the holes.

Personally, I use a soldering iron to create the hole and just press the screw in quickly. Works fairly well, and I recommend printing with 100% infill for strength and laying it down to optimize the load (which will result in more supports), but laying it high, in my experience, breaks easily.

I recommend printing in pairs; this is not a 1:1 copy; therefore, if it's using the OEM, it will not press correctly.

Threw in an extra Pad Holder file if you need, it works fine.