Heltec V4/V3 Snap Together, No Screws!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The model consists of 4 parts. Snap together for a super simple case for your Heltec V4 or V3
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 514
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The model consists of 4 parts one of which is the buttons. Three parts snap together for a super simple case for your Heltec V4 or V3. The case provides room for various batteries but fits 2 - 18650 batteries within a tray very nicely. The case contains a GPS slot to hold the GPS in a secure and upright direction. Make sure you use the parallel battery trays to maintain voltage at 3.7 volts. Hope you enjoy the simplicity of the design as much as I do. There are 2 sets of buttons, the slightly longer ones are for the V3. PRINT THE BODY WITH THE BACK OPENING ON THE PLATE.