1 / 8
Jaguar X150 XK XKR Parcel Shelf Fixing — zdjęcie 1
1 / 8

Jaguar X150 XK XKR Parcel Shelf Fixing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parcel Shelf fitting for the illustrious Jaguar XKR

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is my take on fixing the attachment for the parcel shelf.

I've had a few of these cars, and got mighty fed up with the default locating pins (absolutely useless, especially if the shelf board ever gets any moisture on it, as it warps permanently.

The default process: Push the locating pins, which hold the board in place, while you screw in the forward retainer.

Reality: Push in the locating pins, while you shimmy around the car, one pin slips out, then you start fixing, then you try and shimmy over to relocate the slipped out one, then the rest falls out.

My solution:

Front:

2 x M8 Rivnuts on the forward holes (you'll need to take off the plastic trim first, so that the rivnut is secured to metal)

The forward M8 fitting houses a bolt (I think it's 35mm long? I'll need to check) which is press fit.

Rear:

Attachment via expanding mechanical joint - I've seen this on ebay for £18 + delivery (Are you having a laugh?!) So I made my own. Sized as a snug fit for the hole, if yours is wider or no longer has the rubber let me know I can publish the fusion360 file.

m4 nut to go into the end, and I had a plastic m4 leg from an old ikea chair lying around. Let me know if you need help / model for this.

Both extremely secure, I'm not going to hang a coolant bottle to prove it.

Tagi