Moroccan Oasis Echo Dot 3 Stand & Rain Shelter

An ornate Moroccan lantern-inspired garden stand and rain shelter for the Amazon Echo Dot 3. The modular pedestal raises the lantern 36 in (914.4 mm); the complete sculptural assembly is approximately 56.6 in (1,438 mm) tall.

FEATURES

• Bowed pierced chamber with geometric openings, pointed arches and rosettes

• Broad eight-rib onion dome with separate ornamental finial

• Open panels for sound and microphone access

• Hidden cable route through a hollow modular pedestal

• Dry-sand ballast reservoir, drainage and removable access

• Parts sized for a 220 × 220 mm printer; roof width is approximately 215.9 mm

PRINT QUANTITIES

• Moroccan body: 1

• Onion-dome roof: 1

• Roof finial: 1

• Base reservoir: 1

• Base cap: 1

• Column: 4 copies

• Top adapter: 1

VERIFIED PRINT

Successfully printed and assembled on a Creality K1C using PETG from SUNLU and Creality. Every part fits the K1C build volume and all connections fit correctly.

RECOMMENDED SETTINGS

Use PETG outdoors. Start with 0.20–0.28 mm layers, 4 walls, 5 top/bottom layers and 20–25% gyroid infill. Print upright. Centre the 215.9 mm roof carefully on a K1C-sized bed and do not add a brim beyond its boundary.

ASSEMBLY AND SAFETY

Route the cable through the sealed central conduit. Fill only the ballast chamber with completely dry sand. Secure pedestal joints with M4 cross-pins/bolts or outdoor-rated epoxy. Test-fit the finial before gluing, and add a drip loop before the weather-protected outlet.

This is a rain shelter, not a waterproof enclosure. Bring it indoors during high winds. The STL meshes were checked for closed/manifold edges and dimensions.

ATTRIBUTION

This is an adaptation of Nrmilanovic’s “Amazon Echo Dot 3rd Gen Rain Cover”:

https://www.thingiverse.com/thing:5395708

The source is licensed under Creative Commons Attribution 4.0:

https://creativecommons.org/licenses/by/4.0/

Changes include the Moroccan pierced enclosure, two-piece ornamental roof and finial, modular 3-foot pedestal, ballast reservoir and cable routing. Amazon and Echo are trademarks of their respective owner; this project is not affiliated with or endorsed by Amazon.