Minimalist Elevated Pet Bowl Stand (Cat / Dog Feeder) – Scalable

Ergonomic Elevated Dual Pet Bowl Stand

A sleek, modern, and sturdy elevated bowl riser designed for cats, puppies, and small dogs. Raising the feeding station promotes a more natural neck posture during eating and drinking, helping to improve digestion and reduce neck strain.

The design incorporates a lightweight honeycomb grid between the bowl cutouts, saving filament while adding a clean, modern aesthetic.

Key Features

• Ergonomic Eating Angle: Elevates water and food to reduce stress on your pet's neck, joints, and spine.

• Modern Honeycomb Lattice: Center hexagonal pattern saves print time and material without sacrificing structural strength.

• Arch Cutouts: Side and front arched cutouts make picking up, moving, and cleaning underneath effortless.

• 100% Scalable: Need a larger or smaller bowl size? Uniformly scale the model in your slicer (X/Y/Z) to match your custom stainless steel or ceramic pet bowls.

• Default Inner Ring Diameter: Designed to fit standard ~115–120 mm (outer lip ~130–135 mm) pet bowls at 100% scale.

💡 Sizing & Scaling Guide

If your bowls have a different rim diameter:

1. Measure the outer diameter of your bowl below the rim (the diameter of the hole needed).

2. Divide your measured bowl diameter by the model's hole diameter (~118 mm) and multiply by 100 to get your scale percentage in Bambu Studio / OrcaSlicer.

   • Example: If your bowl needs a 140 mm hole: (140 / 118) * 100 = ~118.6% scale.

Print Settings