Jura E6 Coffee Machine Bean Hopper Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Printable allows you to extend the bean hopper on your Jura E6 by around 200%. Print both Hopper and Lid.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Jura make amazing coffee machines, but its a shame they don't make them with bigger bean hoppers!
This printable allows you to extend the hopper volume by around 200%; the hopper fits snugly into the base machine, and the original clear plastic lid presses snugly into the new printed lid. The printed Lid then acts as the hopper lid, with the original lid acting as handle and observation port into the hopper.
The original lid could be adjusted to fit more loosely to act in it's original capacity, and the new lid printed could be super-glued into the hopper, if you prefer. be careful when lifting the lid that it doesn't lift the hopper out of the base unit! Two small pads of double-sided padded tape will help to prevent this, though on my print, and with my machine, the fit is tight enough that this has not happened.
I may try making a larger volume version...
F360 files included in case you want to make modifications.