Pulse LED sensor harness for Landis+Gyr E470 Smart Meter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pulse LED sensor harness for Landis+Gyr E470 Smart Meter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I've recently had a Landis+Gyr E470 smart meter fitted, but unfortunately it has not been able to connect to the network (bad signal inside) so I just built my own pulse LED sensor (based on Home Assistant Glow)
As I wanted to assemble the whole thing on top of the meter, I designed this harness to do it.
After printing, just take a small nail and manually puncture two holes side by side so you can fit the LDR wires through and then connect it to the ESP board.
Note: I know that a photodiode would be preferable, but I've been using an LDR with no issues at all, so that is why there's only 2 wires here.