Pulse LED sensor harness for Landis+Gyr E470 Smart Meter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pulse LED sensor harness for Landis+Gyr E470 Smart Meter
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I've recently had a Landis+Gyr E470 smart meter fitted, but unfortunately it has not been able to connect to the network (bad signal inside) so I just built my own pulse LED sensor (based on Home Assistant Glow)
As I wanted to assemble the whole thing on top of the meter, I designed this harness to do it.
After printing, just take a small nail and manually puncture two holes side by side so you can fit the LDR wires through and then connect it to the ESP board.
Note: I know that a photodiode would be preferable, but I've been using an LDR with no issues at all, so that is why there's only 2 wires here.