Voron 300/350mm Top Hat with Hinged Lid for Click Clack Doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A composite of a few other ideas brought together into a top hat for a 300mm Voron
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 9Sep26: Added Step and F3d files
Update 10Sep26: CAD/STLs fix and BOM
Update 25Sep26: Added 350mm size
Coming soon: Printing instructions. TL;DR Getting this right in ASA or ABS requires a bit of care
I couldn't find a top hat that met my requirements:
Click clack compatible
Mirrored bottom skirts including Click clack facade
Hinged top lid
With use of other great models I produced this.
Can provide detailed printing instructions on request
Printed Parts
If you are building for a 350mm printer, don't print any part with '300' in the name
And if you are building for a 300mm printer, don't print any part with '350' in the name
There are a few options for filament guides, mid panels with or without voron logo etc
Hardware:
1mm and 3mm Foam tape | 1 |
Connecting Pins (see STLs) | 12 |
F695 Bearing | 1 |
Heat Insert M3x5Dx4L | 18 |
M3 roll in nuts | 38 |
M3 Washers and lock washer | 4 |
M3 x12 SH | 1 |
M3x10 SH | 1 |
M3x12 SH | 6 |
M3x16/18 SH | 1 |
M3x40 SH | 2 |
M3x6 SH | 2 |
M3x8 SH | 34 |
M3x8/10 SH | 16 |
M5x12/16 BH | 4 |
Or per component
Component | Part | Qty | Notes |
General | 1mm and 3mm Foam tape | 1 | Between panels and under the top door |
General | Connecting Pins (see STLs) | 12 | |
Facade > Panels | M3x12 SH | 6 | |
M3 roll in nuts | 6 | ||
Facade > Serial Plate (mid panel) | Heat Insert M3x5Dx4L | 4 | |
M3x8 SH | 4 | ||
Corners | M5x12/16 BH | 4 | corner to 2020 extrusion below |
M3x8/10 SH | 8 | corner to roll in nut in 2020 extrusions below | |
M3x8 SH | 8 | corner to front panel | |
Heat Insert M3x5Dx4L | 8 | ||
M3x8/10 SH | 8 | corner to rear hinges | |
M3 roll in nuts | 8 | ||
Hinges | M3x40 SH | 2 | |
Heat Insert M3x5Dx4L | 2 | ||
Panels, Left, Right, Rear Pairs | |||
M3x8 SH | 12 | ||
M3 roll in nuts | 12 | ||
Left, Right, Rear Mid Panels | M3x8 SH | 6 | |
M3 roll in nuts | 12 | ||
PTFE guide mount | M3 x12 SH | 1 | for securing the bracket to the rear mid panel |
F695 Bearing | 1 | ||
M3x16/18 SH | 1 | for securing the arm to the bracket | |
M3 Washers and lock washer | 4 | ||
External PTFE tube guide | M3x10 SH | 1 | |
Heat Insert M3x5Dx4L | 1 | ||
M3x8 SH | 1 | ||
Mellow MDM sensor mounting | M3x8 SH | 3 | |
Heat Insert M3x5Dx4L | 3 | ||
Daylight Stick | M3x6 SH | 2 |
