FunWater Paddle Clamp Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The FunWater (some at least) have a pressure lock to allow quick adjustment of the paddle length. This lever lock clip…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
The FunWater (some at least) have a pressure lock to allow quick adjustment of the paddle length. This lever lock clip on mine came off (the retaining pin is not well held). So, I created this piece to replace it and used a piece of an old wire hanger as the hinge pin. Worked like a charm. I'm including a link to the onshape original part in case you want a different hole size (suggest 2-2.5mm).
Note that this part has a proper orientation. It should be printed on it's side with support material. You want the layer direction to be perpendicular to the lever pin for maximum strength.
CAD
Original design is available (and editable) in OnShape here:
Category: Sport & Outdoors