FunWater Paddle Clamp Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The FunWater (some at least) have a pressure lock to allow quick adjustment of the paddle length. This lever lock clip…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
The FunWater (some at least) have a pressure lock to allow quick adjustment of the paddle length. This lever lock clip on mine came off (the retaining pin is not well held). So, I created this piece to replace it and used a piece of an old wire hanger as the hinge pin. Worked like a charm. I'm including a link to the onshape original part in case you want a different hole size (suggest 2-2.5mm).
Note that this part has a proper orientation. It should be printed on it's side with support material. You want the layer direction to be perpendicular to the lever pin for maximum strength.
CAD
Original design is available (and editable) in OnShape here:
Category: Sport & Outdoors