1 / 2
Dust Extractor Hose Connector, DeWalt DW621 — zdjęcie 1
1 / 2

Dust Extractor Hose Connector, DeWalt DW621

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The DeWalt DW621 router has integrated dust extraction, but I can't find the proper connector for the port to my…

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

The DeWalt DW621 router has integrated dust extraction, but I can't find the proper connector for the port to my (1.5") hose. After a little fiddling this came out pretty well. Mine was printed in PETG and the clips hold well.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.4mm nozzle, 0.12mm layers

Infill:

gyroid, 20%

Filament: Unknown PETG white

Notes:

I printed with a brim as I often have adhesion problems, but YMMV. Max angle (when printed in the obvious orientation) is 55 degrees (in the clip detents), so no supports were required. Part contains a mix of inch (mainly on the hose port) and metric (in the router connection).

Original Model URL

The original OnShape model can be accessed here.

Category: Parts

Tagi