Goa Breeze V3 (2.5 & 3 inch frame for DJI O4/Analog)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a redesign of my Goa Breeze for the DJI O4 Wide & analog. Available in 2.5 & 3 inch sizes
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Reach me on social medias for questions, news and support [Instagram] [Facebook] [YouTube]
If you like my work you can [support me via ko-fi]
------
Updates
2026/10/16 : added a Caddx Ascent nano cam mount (would work for short analog nano cam as well i think)
2026/10/15 : added a O4 with O3 lens cam support (O3 lensmod)
2026/09/23 : added 2.5 inch frame CUBIC Variant
2026/09/17 : added 2.5 inch frame CLASSIC Variant
2026/09/16 : added a O4 Wide cam support that offers better protection + 2 screw holes for the camera. (v1-1)
2026/09/15 : added an analog camera front support (frame can be slammed to 10mm standoffs if one can build so low (with vtx integrated aio for example)).
The GOA Breeze is an fpv frame intended to be simple yet very functionnal aimed at 2.5 & 3 inch 3S/4S setups. The original design was made around 2020 at a time where digital FPV didn't even exist ! These days one have plenty of lite digital transmitters options so this kind of frame becames relevant again.
Here i wanted to be able to use the new DJI O4 Wide cam and transmitter so i adapted the frame to have a front TPU Camera Mount, I also had to shift the layout from original True X to a Wide X to make camera clearance at the front but that's basically it.
I made 2 versions, one called CLASSIC that is a very, well, classic frame and another one named CUBIC that i wanted as a tribute to the OG Diatone Cube with a light struted design that was impressively skinny yet very strong. This second variant is intended more for lighter builds.
A one inspired from the OG Diatone Cube that comes with very thin strut arms. This version is lighter than the classic one by approx 30%.
Frame Specs
This frame comes in 2 versions : Classic (a traditional looking one) and Cubic (a struted thin à la CUBE style, my favorite). It also comes in 2 sizes : 3 inch and 2.5 inch. Note that the 2.5 is slightly shorter, by 8mm on it's body part so you cannot mix and match top plates and frames for each size.
2.5 inch or 3 inch fpv frame
WideX Layout
Classic 3 inch : Supports 9x9 and 12x12 motors
3 inch Cubic & 2.5 inch all versions : Supports 9x9 motors
Support AIO FC (25.5x25x5 mount)
frame weight (depending on hardware) :
3 inch classic : Around 25g.
3 inch cubic : Around 23g.
2.5 inch classic : Around 20g.
2.5 inch cubic : Around 15g.
Please note that the 2.5 inch frame, while it looks exactly the same as the 3 inch is 8mm shorter.
Mounting hardware
The frame is intended to have a low profile of 16mm between standoffs.
4 x M2 16mm standoffs
4x 8 to 12mm screws for the bottom standoffs attachment (i use long screws to attach standoffs to the frame on the bottom)
4 x 6mm M2 Countersunk head screws (for the top plate)
4 x M2 16mm for AIO+VTX installation
8 x M2 2mm thick nylon nuts for AIO FC installation
Getting the frame cut
My recommended places are [www.cncmadness.com] (CA/US/Worldwide) and [www.carbon-posten.de] (EU/Germany), [CNC DRONE 91] (EU/France), [CNC Dupays] (EU/France), [CNC27 FPV] (EU/France). Great quality cuts and fair pricing/delivery time.
you need to send the provided DXF and STEP files with the following instructions :
1 x GOAv3 frame : 3 mm thick T700 Carbon Fiber (try 4mm for extra strength)
1 x GOAv3 top plate : 2mm thick for the Cubic, 2mm for the Classic one
The STEP files indicate the countersunk holes for the top plate and all frame chamfers.
PS : the 2.5 would probably work in 2.5mm frame and 1.5mm/2mm top plate for a lighter version
A cut should come around 40€ in 3 inch (mine comes from CNC DRONE 91) and may vary from shop to shop. Probably around 30€ for 2.5 inch.
Feel free to ask me for directions and help.
3D Prints
Some prints are provided here and work on all versions and sizes :
Cam support for DJI O4 Wide camera
Cam support for analog 14x14 cameras (nano size)
XT30+antenna support
Rear bottom protection
You probably want to print those at around 50% infill using TPU 95A filament.
My Setup (3 inch/3S)
FpvCycle 1304 5000kv motors (discontinued, get something equivalent like 1204, 1403, 1404)
Flight Controller :
BetaFPV Cube 2-4S w ELRS : https://betafpv.com/collections/2-4s-brushless-fc/products/cube-2-4s-brushless-flight-controller
Flywoo GOKU F405 HD 3-4S : https://flywoo.net/products/goku-f405-hd-3-4s-20a-aio-plug-play-o4-o4-pro
DJI O4 Wide VTX
RP1 ELRS RX(get an aio with integrated RX!, much simpler those days)520 mAh 3S Lipo
HQ Prop T3x25 props
If you want to go 4S you can use 1404 motors