LayersFactory
Zgłoś model
1 / 6
Modular Honeycomb Coffee Station – Sugar Packet & Stirrer Holder (Support-Free) — zdjęcie 1
1 / 6

Modular Honeycomb Coffee Station – Sugar Packet & Stirrer Holder (Support-Free)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vinors3DLab

Vinors3DLab

@Vinors3DLab

Upgrade your coffee bar or kitchen setup with this stylish, functional, and 2-piece modular coffee organizer! Designed…

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
1
Wyświetlenia
65
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (4)Powiązane

Upgrade your coffee bar or kitchen setup with this stylish, functional, and 2-piece modular coffee organizer! Designed specifically for FDM 3D printing, this model keeps sugar packets and wooden coffee stirrers neatly organized in a compact, modern design.

🌟 Key Features

  • 100% Support-Free: Optimized geometry so both pieces print cleanly flat on the build plate without any support material.

  • Dual-Layer Honeycomb Aesthetics: The outer shell features a geometric mesh pattern that lets the color of the inner bucket pop through.

  • Ergonomic Stirrer Holder: Integrated side tube positioned at a comfortable angle for quick, smooth access to wooden stirrers.

  • Modular Color Customization: Swap the inner bucket with different colored filaments to match your room, office, or coffee bar theme.

  • No Assembly Hardware Needed: Simply drop the inner bucket into the outer shell.

🖨 3D Printing & Technical Settings

Setting

Recommended Value

Notes

Supports

NONE / NO

100% Support-Free design

Orientation

Flat on build plate

No tilt or rotation needed

Layer Height

0.20 mm

0.16 mm for an ultra-smooth finish

Wall Loops / Perimeters

2 to 3 walls

Ensures strength along the honeycomb mesh

Infill Density

15% – 20%

Gyroid, Honeycomb, or Grid

Top / Bottom Layers

4 Top / 3 Bottom

Standard setting

Material

PLA or PETG

Matte or Silk PLA looks great on the inner bucket!

Build Plate Adhesion

None / Standard

Use a brim only if you experience corner warping

🧩 Assembly Instructions

  1. Print the Outer Shell (black in photos).

  2. Print the Inner Bucket (yellow/gold in photos).

  3. Slide the Inner Bucket inside the Outer Shell.

  4. Fill with your favorite sugar packets and stirrers!

☕ Support & Share

If you like this model, please leave a like / boost, post a Make with your color combinations, and leave a review! Happy printing!

Tagi

organizerhomecoffeestirrersugarspoonthingiversehomedecorcaffecaffeinekitchenorganizercaffettierasugarholdercoffeestirre