1 / 6

Modular Honeycomb Coffee Station – Sugar Packet & Stirrer Holder (Support-Free)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Vinors3DLab

@Vinors3DLab

Upgrade your coffee bar or kitchen setup with this stylish, functional, and 2-piece modular coffee organizer! Designed…

Rating: 0 / 5
Likes: 1
Downloads: 13
Makes: 1
Views: 62
Reviews: 0

Updated at source: Sep 9, 2026

Model information

Source: Printables
Category: Kitchen
License: Creative Commons — Attribution — Noncommercial — Share Alike

Details Files (2)Makes & comments (Makes: 1) (Comments: 1)Remixes (0)Collections (4)

Upgrade your coffee bar or kitchen setup with this stylish, functional, and 2-piece modular coffee organizer! Designed specifically for FDM 3D printing, this model keeps sugar packets and wooden coffee stirrers neatly organized in a compact, modern design.

🌟 Key Features

100% Support-Free: Optimized geometry so both pieces print cleanly flat on the build plate without any support material.
Dual-Layer Honeycomb Aesthetics: The outer shell features a geometric mesh pattern that lets the color of the inner bucket pop through.
Ergonomic Stirrer Holder: Integrated side tube positioned at a comfortable angle for quick, smooth access to wooden stirrers.
Modular Color Customization: Swap the inner bucket with different colored filaments to match your room, office, or coffee bar theme.
No Assembly Hardware Needed: Simply drop the inner bucket into the outer shell.

🖨 3D Printing & Technical Settings

Setting	Recommended Value	Notes
Supports	NONE / NO	100% Support-Free design
Orientation	Flat on build plate	No tilt or rotation needed
Layer Height	`0.20 mm`	`0.16 mm` for an ultra-smooth finish
Wall Loops / Perimeters	`2` to `3` walls	Ensures strength along the honeycomb mesh
Infill Density	`15%` – `20%`	Gyroid, Honeycomb, or Grid
Top / Bottom Layers	`4 Top / 3 Bottom`	Standard setting
Material	PLA or PETG	Matte or Silk PLA looks great on the inner bucket!
Build Plate Adhesion	None / Standard	Use a brim only if you experience corner warping

🧩 Assembly Instructions

Print the Outer Shell (black in photos).
Print the Inner Bucket (yellow/gold in photos).
Slide the Inner Bucket inside the Outer Shell.
Fill with your favorite sugar packets and stirrers!

☕ Support & Share

If you like this model, please leave a like / boost, post a Make with your color combinations, and leave a review! Happy printing!