Counting matching models…
This is a simple but stylish holder for sugar and stir sticks, suitable for home use, as a piece of your work kitchen or even a snack corner in a conference room. Types double - the standard model and how it was designed - to accommodate…
Cover for Metrohm 801 stirrer to protect the stirrer from liquids. There are two types of covers, with or without a rim. The cover without a rim can be printed without additional supports. I would recommend printing it in polypropylene,…
Wax Spatula Set – 100mm & 150mm (3D Printable) This printable wax spatula set includes two sizes (100mm and 150mm) inspired by the humble wooden waxing stick, the unsung hero of hair removal, now promoted to reusable, 3D-printed status.…
I created those little helper set for small parts when I cleaned small parts I printed on my first SLA printer. Probably obsolete nowadays that I have a Photon M7 Pro instead of a Elegoo Mars Pro. I used a basic beaker back then. That…
A simple 3-bladed paint stirrer which uses common/cheap dowel rod for a shaft (friction fit). Perfect for using up the last few meters on a spool of filament. Fully reusable, but cheap enough to throw away [almost] guilt-free. Just drive…
After mixing small batches of acrylic paint with nothing but the end of the paintbrush to do the actual mixing, I got fed up. I'm not an artist and don't have a palette knife, so I improvised! It's itty bitty (the jar in the first picture…
This is a DIY magnetic stirrer I designed to upgrade my old "pc-fan-approach" Things needed: 1x 300mm GT2-belt 2x 608zz or 608rs bearings 1x M8x40mm or M8x50mm bolt 1x M8 Locknut 1x 2212 Brushless motor (I used an A2212/13T with 1000KV)…
3D gedruckter Magnetrührer für das Hobbylabor oder die Küche aus PLA [Bauteil Auflistung] PC Fan Step Down Modul Poti Kippschalter Ladebuchse Kabel //english: 3D printed magnetic stirrer for the hobby lab or kitchen. [component listing]…
This adaptor fits onto a pretty standard personal massage device that you just may have laying around. This particular adaptor is fit for an arboleaf massager but I've attached the fusion file so that you can edit the adaptor to fit any…
Hello readers this is a small project I had done over the weekend. I needed a magnaeic stirrer at work, but because of some circumstances we couldn't order one. So I thought why shouldn't I build one by myself. I designed this thing with…
This magnetic stirrer uses a PC fan, a Mosfet, Potentiometer a few magnets and some wires. The purpose of this device is to stir with a rotating magnet without having contact inside the bottle/erleymeyer except for the single magnet. I…
Hey everyone! Another day, another Halloween decoration! This time, I decided to create a cute set of cocktail stirrers featuring cats, pumpkins, bats, and spiders. Each piece has its own child-friendly charm and fits perfectly into your…
The stirrer of my baking mashine has been broken. So I made this part is a replacement. Should be useable for most machines. Just use the SCAD file to make your own part. The example is printed with Verbatim PET because of food safety.…
A lot of nice stirrers out there already, but I needed one that was about 6 in long and able to be put in a hand drill for stirring 2-part epoxy.
This is for 20x6x1,5mm neodym magnets, but you can take the FreeCAD file and modify it for your needs (MagnetsSketch)
Quick and easy paint stirrer, designed to print in 20 minutes using only 10g of filament! Length of the stick is 230mm so it should print on most 3D printers! ✨If you like what I make ✨ Like, follow, comment, share, review, and post your…
I needed it for storage, but maybe it would also be helpful for traveling
This is a very versatile OpenSCAD app that will let you create a wide variety of tools with different profiles and uses: spatulas, moulding tools, sanding blocks and paint stirrers (and what you can imagine). Some STLs are included as…
A replacement knob for the rotary encoder of the IKA RTC Basic magnetic stirrer, featuring a position marking printed in a second color.
Description This is a simple model, there are other WDT tools out there, but I like to share it because I found something interesting which make my design unique: The 3D printer nozzle cleaning needle, that you probably already have a…
Coffee Organizer for Coffee Corner Enhance your coffee station with this stylish and functional Coffee Cup & Stirrer Organizer . Designed to hold different cup sizes and neatly store stirrers, this model is perfect for home, office, or…
Espresso Tamper and Stirrer Tray - 58mm Tamper Holder Keep your espresso setup tidy with this handy tray designed specifically for lever espresso machine accessories! This tray provides dedicated spots for your 58mm tamper and a…
Magnetic Stirrer Adapter for Anycubic Wash & Cure 3 Plus This project is a fun and useful mod for the Wash & Cure 3 Plus, adding extra functionality beyond just cleaning prints. I designed a special adapter for the Anycubic Wash & Cure 3…
I needed a small plastic stirrer for mixing polyurethane resin for casting. Doing it manually seemed OK, but the distribution of dye left something to be desired - so I made a stirrer :-) Works perfectly! Doesn't mix very aggresively -…
Do you only need 3x neodimium magnets 9x3, 8x m5 nuts, fan diameter 80, 30 ohm rezistor, old damaged usb cable, superglue. You canadjust the rezistor size according to the speed. layer height 0,2 nozzle 0,4
I affectionately call this the bean protector. It was designed to fit a 150mm crystalizing dish to cover the magnetic stirrer. There are two versions, The second version with extra protection did not print well (the cage was too small and…
Stirrer for a 6mm Shaft, 45mm Outside Diameter, 45° Blade Angle, most suitable for viscous Fluids I use it to mix polyethylene glycol granules into water
Tired of mixing paint or epoxy by hand, use this tool. Designed to be used with a 6mm threaded rod
stirring rod holder made for Krups hand mixer, but probably also fits other brands
This is a simple but stylish holder for sugar and stir sticks, suitable for home use, as a piece of your work kitchen or even a snack corner in a conference room. Types double - the standard model and how it was designed - to accommodate…
Not Looking for Perfectly Mixed Paints? This 3D Print Isn't For You! If you prefer your paints unstirred and unshaken, then you can stop reading now! But for those who crave a smooth, consistent mix, simply drop your paint bottles in and…
The feet on some Thermo Fisher magnetic stirrer models are very short. As a result, liquids (especially salt-rich water) can cause corrosion and electrical safety issues when there are inevitable spills. This object is a stand for the…
Cover for Metrohm 801 stirrer to protect the stirrer from liquids. There are two types of covers, with or without a rim. The cover without a rim can be printed without additional supports. I would recommend printing it in polypropylene,…
Paint Can Opener: Provides better angled lift than a screwdriver. Use two for stubborn can. Places on the back side for magnets. Choice of two each 4mm and 6mm, and one 8mm, all 2mm thick. Hangup hole for 6mm. I used PLA at 0.20 layer, 4…
A resin stirrer is used to mix resin in the resin tank prior to printing. Ive printed this with TPU so it won't damage the film.
This cooling bowl stirrer is an open-hardware accessory designed to be compatible with the Aillio R1 and R2 coffee roaster cooling bowls. By actively agitating the beans during cooling, it: Speeds up heat dissipation Improves airflow…
Eccentric hole makes paint go brr when put in a electric drill, preferably a really fast one with a wall plug Put a ball bearing in your paint bottle This thing is all walls, print upright Requires: 1 M4x40mm flat top bolt 2 M4 washers 2…
These Coffee Sweetener & Stirrer Stations are compact, countertop-friendly organizers designed for everyday coffee and tea drinkers who value both order and practicality. The main compartments neatly store approximately 50 standard…
Part for a magnetic stirrer with hot plate, use PLA, PETG, or ABS. Designed to work with standard optical interrupter sensors. Use black or opaque filament.
Wax Spatula Set – 100mm & 150mm (3D Printable) This printable wax spatula set includes two sizes (100mm and 150mm) inspired by the humble wooden waxing stick, the unsung hero of hair removal, now promoted to reusable, 3D-printed status.…
antenna mount can be glues, double sided tap, or screwed in place and uses a zip tie to cinch the coffee stirrer in place.
Beim mixen von 2K Massen habe ich immer wieder das Problem, dass dabei viele Luftbläschen eingerührt werden. Durchs Vakuumieren wird es deutlich besser, aber ich wollte einen Rührstab der weniger Luft ein mischt. Deshalb ist dieser sehr…
I created those little helper set for small parts when I cleaned small parts I printed on my first SLA printer. Probably obsolete nowadays that I have a Photon M7 Pro instead of a Elegoo Mars Pro. I used a basic beaker back then. That…
A simple 3-bladed paint stirrer which uses common/cheap dowel rod for a shaft (friction fit). Perfect for using up the last few meters on a spool of filament. Fully reusable, but cheap enough to throw away [almost] guilt-free. Just drive…
This magnetic stirrer is built around a recycled standard 70mm PC fan . The model is designed as a screw-together assembly where, once finished, the 5.5mm × 2.5mm jack locks into the housing in a form-fit way. To ensure durability in a…
Small dish for mixing and using powdered wood putty (like Durham's) Combo scoop and stirrer for scooping, mixing, and spreading the putty once mixed. Printed the stirrer with 4 walls for stiffness and strength; no supports needed for…
Gel Air Freshener Stirrer – Restore Scent (Fits 57mm Inner Diameter) Gel-type air fresheners often lose their scent quickly because only the top surface dries out, while most of the gel remains unused inside. Instead of adding water,…
A simple paint stirrer for small batches, for which large mixers (like my other models)would be too much. If you need to mix larger quantities of paint or any other liquid, take a look at my drill powered mixer models:
After mixing small batches of acrylic paint with nothing but the end of the paintbrush to do the actual mixing, I got fed up. I'm not an artist and don't have a palette knife, so I improvised! It's itty bitty (the jar in the first picture…
Magnetic Stirrer Fish Housing for 6x20mm Magnets Printed with petg 0.12 layer height, %100 solid in vertical position with auto tree supports. Also recommended 10mm brim. PS. Your slicer will warn you as it is nonmanifold but don't mind…
This is a portable magnetic stirrer I designed for field titrations. It's perfect for field titrations, or for operating in environments without 240V power, such as fridges or glove boxes. This stirrer uses a pair of AA rechargables*, or…
Paint Mixer - remixed from https://www.printables.com/prints/171895-paint-mixer to give it more robustness on the shaft element. TinkerCad file: https://www.tinkercad.com/things/6CBctKDDngC Shaft diameter increased, base/propeller…
Hi This is an alternative agitator rod for the Paterson Super System 4 rotary development tanks. I have two issues with the original agitator rods: They are so short you easily get photochemistry on your fingers if you're not careful when…
Hi This is an alternative agitator rod for the Paterson Super System 4 rotary development tanks. I have two issues with the original agitator rods: They are so short you easily get photochemistry on your fingers if you're not careful when…
This is a replacement for the standard axle of the bean stirrer in a Sarista bean funnel. The original one "expires" after about one and a half funnels of beans. When you replace that one with this, the bean funnel can be refilled…
5mm square shaft should work with most drills. PETG ideal, but you could print from anything and dispose after use. Be careful using it on high speed! It can create a strong vortex and potentially splash.
This Propeller was designed to be the same like from the CW1 Washing Station from Josef Prusa but with Magnets (4 Ø x 8mm) that will be embedded in to the Print.…
Make your own resin part washing station for cheap. Print part with 100% infill so it does not float. Pickle Jars Magnetic Stirrer Extra Stir Bars (If you use more than one jar) Print Settings Infill: 100 Category: 3D Printer Accessories
Not happy with the capsule kind for my SH-3 20 watt motor stirrer. Accepts up to 14mm magnets up to 10mm tall. Epoxy them in. Category: Tools
We were asked by the chemistry department to create a grip or holder to go onto the edge of a glass stirrer. The holders were also made with the objective that fewer stirrers would roll off the table and shatter. Our objective was to…
Remixed the spiral sculpture into a paint mixer. Fixed the original since the loops were touching, this one everything is detached and I added a couple of turns too. Print as it shows standing straight up with supports touching bed & brim…
Rührwerk für Flüssigkeiten. Als Antrieb wurde ein alter 12V 120mm PC-Ventilator verwendet. Dieser wird über eine Spannungsreglerplatine 2596 geregelt. Auf der Platine wird das Trimmpoti ausgelötet und durch ein Poti 10K Ohm mit parallelem…
This a device to shoot coffee stirrers, it is adjustable for different types and brands of coffee stirrer. Perfect in a serious office, coffee stirrer on the floor will not raise any bosses suspicions! Personally I use Nespresso stirrers,…
Print at any settings, I just used my default 0.2 Layer Height setting and they come out fine. I'd recommend using a brim or raft just to help it to not peel up.
This is a Vacuum Chamber optimized for Epoxy or Polyurethane mixing. You can place it on a magnetic stirrer and stir the solution while in vacuum. I printed it from PLA and tested successfully. I also made the Seal CAD to print from TPU…
Hot Pepper Drink Stirrer. I added text (not in the stl - modify to add your own) for our Pontoon Patio Crawl. The g-code file includes a stop for a filament change from Red to Green.
Another drink stirrer that I created as a souvenir for our pontoon patio crawl.
I keep my Aeropress filters on my kitchen counter, exposing them to dust, pollen, etc. I wanted something to keep dust off of the top filter, so I whipped up this simple cover. This model is an update to my previous version , adding…
This was migrated from my Thingiverse profile and is from 2016. A more elegant solution to magnetic stirring multiple vials on a stirrer/hotplate than bunching them together using elastic bands. It goes without saying that this is for…
One of my wife's hobbies is calligraphy. (See Debbie Campbell's Calligraphy at http://anomaly.org/debbie/calligraphy/ ) She also mixes inks for special projects. She makes the inks in relatively small batches and stirring the mixture with…
This is a easy printable sugar bag container with a part dedicated to the coffee stirrers. Perfect companion for instant espresso machines like nespresso. Print instructions Just print it and fill it.
I picked up this compact magnetic stirrer on amazon. By no means am I advocating this specific model for anything other than being inexpensive and small. I noticed power was a barrel plug that used 5v 1a for power. This is what USB offers…
I have an Anycubic Photon UV resin printer and washing the printed parts has always been a bit of a faff. I saw ChickenHaunt's magnetic stirrer parts on Thingiverse and thought it was a great idea, so printed them. Unfortunately, I found…
I bought a cheap stirrer for my resin printing, and while it came with a stand that holds it upright (so it can drip dry), that stand is not good for storing the stirrer. So I designed one in FreeCAD just to keep the stirrer and its…
This is a stirrer sized to fit a solo cup. It's useful for mixing up epoxy. The 10mm shaft should fit most 3/8" drill chucks.
knob on stirrer broke so I modeled a new one in blender. I printed 2 tone by pausing at layer 56 and swapping filament Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2 Infill: 50 Filament: 3D…
Design criteria: It had to be usable in the field or the lab. Therefore, it had to be compact and easy to store and transport, ……and that includes the magnetic stirrer bar….. And it would need to run on batteries, As it also had to double…
Two sizes: 70mm and 40mm diameter. Watch the Video: https://www.instagram.com/reel/CkjCa6CjjpO/?utm_source=ig_web_copy_link Like it? Please don’t forget a like any maybe a follow, thanks a lot 😊 For more Project’s and insights, see my…
Simple wall attachable holder for Kennwood Cooking Chef XL (and compatible) stirrers. Just use two screws to attach to wall.
Attach this disc to a battery powered kitchen egg stirrer and glue sanding paper to it. I tried 180 grit paper but it was too aggressive. 600 grit worked much better. Bonus feature: Kids like it. You can use it to grind back finger or toe…
This stand allows you to mount the build platform of an ELEGOO MARS 3D printer on the top of a food storage container ( https://www.amazon.it/gp/product/B07856RRDW ) used as a bath to wash your 3d prints by means of a magnetic stirrer (…
Designed so no gluing is required, it just slips over the power connector on the back. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20 Filament: Generic PLA Category: 3D Printer…
This is a simple compact magnetic stirrer made to help mixing up photographic chemistry, though it could be used for other chemical mixing purposes. The idea is based on a number of DIY projects seen on YouTube that use an old computer…
Creer à partir d'un ventilateur de pc , cette agitateur magnétique me permet de faire mes mélange pour la résine et les pigments de couleur , ou aussi lors du nettoyage des pièces il faut : un ventilateur 12V : https://amzn.to/3kMQcbb Un…
Instructions: Cut the fan from its frame and remove the blades. Place the 2 magnets 1 next to the other and mark their upper side. glue the magnets on the fan, with the marked side facing the same direction. or use the bracket. Prepare…
This is a DIY magnetic stirrer I designed to upgrade my old "pc-fan-approach" Things needed: 1x 300mm GT2-belt 2x 608zz or 608rs bearings 1x M8x40mm or M8x50mm bolt 1x M8 Locknut 1x 2212 Brushless motor (I used an A2212/13T with 1000KV)…
The cheapest second-hand magnetic stirrer I could find was €75. That's a lot of dough for some magnets on a motor. So I designed my own, based on some old PC fan's and magnets I had laying around. You cut off the fan blades with a pair of…
A novel design of a catalytic stirrers for stirred tank reactors (CSTR and BR ) that can only be manufactured by 3D printing techniques is proposed. See the full open access paper at:: https://doi.org/10.1016/j.addma.2024.104233…
The magnets used are 6mm diameter by 3mm thick. The spacing is 20mm center to center. Don't forget to get the polarity of each magnet correct. There is only 0.1mm of clearance in the design for the magnets. They slipped in perfectly for…
No support. Final project is 90mm(height)by 27mm(diameter). Needles are purchased from amazon. 1 package with 10 pieces. The needle total length is 80mm, tip is 50mm and end is 30mm. The the needle will drop fit into the base holes. I…
