Stirrer, mixer
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.49 – €4.27 net (excluding VAT)
For file: Stirrer_0.15mm_PETG_MINI_4h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.88 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 4.96 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simply stirrer for containers with a narrow neck.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 111
- Makes
- 1
- Views
- 1,038
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I needed to mix the paint in a 25 liter barrel. The narrow neck of the barrel did not allow the use of conventional stirrers. That's why I designed a thin stirrer, which can be inserted into the narrow neck of the barrel in a helical motion and then mix the paint without any problems.
In the workshop I found only a steel rod with a diameter of 12 mm, so the stirrer has a thread of M12x1.75. I passed the thread through the tap in the mixer.
The stirrer is driven by a standard electric drill with speed control.
PETG printing without supports, number of perimeters 5, infill 25%.