1 / 3
M8 Spiral Drill Mixer – 80 mm Paint, Resin & Liquid Stirrer — image 1
1 / 3

M8 Spiral Drill Mixer – 80 mm Paint, Resin & Liquid Stirrer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Six-blade spiral mixing paddle for an M8 threaded rod, designed for paint, resin and low-to-medium viscosity liquids.

Rating
0 / 5
Likes
3
Downloads
58
Makes
0
Views
138
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

M8 Spiral Drill Mixer

A compact six-blade spiral mixing paddle designed for use with a standard M8 × 1.25 threaded rod and a drill or cordless screwdriver.

The curved blades generate a strong axial flow, making the mixer suitable for paint, epoxy resin, water and other low-to-medium viscosity liquids.

Model specifications

  • Overall dimensions: approximately 78.3 × 77.3 × 60 mm

  • Six spiral mixing blades

  • Internal thread: M8 × 1.25

  • Thread depth: approximately 40 mm

  • Support-free design

  • Designed in FreeCAD

  • Original design by MENzi 3D

Required hardware

  • M8 threaded rod

  • M8 lock nut recommended

  • Drill or cordless screwdriver

Screw the paddle onto the threaded rod and secure it with a lock nut. Use the direction of rotation that tightens the standard right-hand M8 thread.

Recommended print settings

  • Material: PETG

  • Nozzle: 0.4 mm

  • Layer height: 0.20 mm

  • Perimeters: 5–6

  • Infill: 100%

  • Top and bottom layers: 5–6

  • Supports: No

  • Print in the supplied orientation

PETG is recommended for its impact resistance and good layer adhesion. Adjust nozzle and bed temperatures for your specific filament.

Safety

Start at a low speed, approximately 200–400 RPM, with the paddle already submerged in the liquid.

Do not run the mixer dry or at maximum drill speed. Inspect the printed part for cracks or damage before every use. Wear eye protection and keep hands, clothing and loose objects away from rotating parts.

This version is intended for paint, resin and similar liquids. It is not recommended for mortar, concrete, thick plaster or food-contact applications.

Tags