1 / 4
Stirrer Stick to fit 1/4 Hex Screwdriver
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small stirrer Stick to fit 1/4 Hex, powered Screwdriver. I made this to stir paints and glues.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 63
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Small stirrer Stick to fit 1/4 Hex, powered Screwdriver.
I made this to stir paints and glues.
I made this from PETG, but PLA would probably work.
It does not need support, but I would recommend a brim.
I printed at 80% fill, for added strength.
Print upright on the large flat part of the strirrer.
Please Note, This is purposly made to fit very tightly, if it is too tight, sand the end slightly.purposelystirrersupport