Small Drill Mixer, Paint Stirrer - Kleiner Rührstab für Akkuschrauber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small mixer or stirrer attachment for (cordless) drills. Ø = 50mm. It takes a 6mm round shaft with a dab of superglue.
- Rating
- 5 / 5
- Likes
- 79
- Downloads
- 727
- Makes
- 3
- Views
- 2,573
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small mixer or stirrer attachment for (cordless) drills.
Ø = 50 mm. It takes a 6 mm round shaft, which i just fixed with a small drop of superglue.
I needed a small attachment for mixing smaller amounts (perhaps up to a litre) of plaster and similar materials.
The commercial one i have is way too large with too long a shaft. ((also it seems i misplaced it))
I recommend printing in PET-G for chemical and moisture resistance and ease of cleaning, as most stuff doesn't like to stick to PET-G
As settings go, I printed mine with:
- 0,4 mm nozzle
- just 2 perimeters
- just 10 % cubic infill
- no supports needed
and it was plenty strong for thoroughly stirring thick mixes of plaster and quartz sand at high speeds. Worked great and was easy to clean