GoPro Peak Design Capture Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very sturdy mount that fits the Peak Design Capture Clip and other arca swiss style tripod mounts!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you already have a Peak Design capture clip, and want a reliable GoPro chest mount, then look no further! This design uses simple assembly to make sure all parts are printed at the optimal orientation. Simply tap all the arms in with a light mallet and slide in the locking pin! Some glue may be used depending on the quality of print or size accuracy.
Two different versions of the mounting body are included below. The Standard mounting body works similar to a normal Peak design mounting plate allowing mounting in all 4 directions. The EasyPrint option requires much less support but allows mounting in only 1 direction!
Print 1x of each arm and 1x locking pin. Print 1x of your choice of mounting body, Standard or EasyPrint.
Look through the photos for additional assembly instructions and printing orientation.
Required Hardware:
(1x) m5 nut, locking nut, or acorn nut.
(1x) m5 GoPro mounting screw or (1x) m5x20 socket cap screw