Bambu scraper with 6x2 magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambu Labs scrapaed edited to use two 6x2 magnets
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a modification of the Bambu Lab scraper grip. Even though I primarily print on a Prusa Core One, I find that the Bambu Lab scraper is superior to any other I've used. As such, I decided to mod it to my needs.
Model features:
Flat sides
Two slots for 6x2 magnets
0.2mm extra depth, so it wont scratch surfaces
0.15mm spacing on the side, should press fit in. Worked perfectly on my Core One. Add superglue if needed
Required hardware:
Bambu Lab Scraper kit
6x2 neodynium magnets
Available on amazon or anywhere such
Printing instructions:
Strength at your discretion. I printed with the following settings:
No supports!
Print in provided orientation
2-3 perimeters
10-15% infill
Gyroid
Whatever material takes your fancy!